Home | Speaker

Speaker

VRX918SP-18 Inch Flying Subwoofer Powered

VRX918SP-18 Inch Flying Subwoofer Powered

1*18 Inch Flying Subwoofer Powered
PA Subwoofer
RMS power：700w
built-in DSP module amplifier
Product description: VRX918SP-1*18 Inch Flying Subwoofer Powered
INQUIRY

18 in. High Power Powered Flying Subwoofer

The VRX918SP is a powered, suspendable subwoofer system containing a neodymium magnet Drive, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

Features:

1）Built-in amplifier module provides 2400 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.

2）18 inch, neodymium magnet driver woofer for high-power capacity and light weight.

3）Integral rigging hardware for simple connection of enclosures and optional array frame.

4）20 mm threaded pole socket for solid, secure satellite speaker mounting.

5）Large port area for reduced distortion.

Specification
Model: VRX918SP
Frequency Range (-10 dB):	40 Hz - 120 Hz
Frequency Response (±3 dB):	45 Hz - 100 Hz
Maximum Peak Output, S.P.L:	120 dB SPL at 1m
LF Driver:	1 x18 inwith neodymium-magnet
Nominal Impedance:	LF: 8 ohms
POWER(at nominal load):	1400 Watts Peak, 700 Watts Continuous(Bridge)
AMP Mode:	Class D,switch power,DSP based
Audio Input Connector:	2* XLR with loop through
Signal Processing:	DSP based, resident in Input Module
AC Power Operating:	110 VAC or 220 VAC, 50/60HzAC
Input Connector:	PowerCon (NAC 3MPA)
AC Loop Through Connector:	PowerCon (NAC 3MPA)
Signal to Noise (20 Hz – 20 kHz, 8Ω):	> -100 dBI
nput Sensitivity :	0.775mV
Amplifier Protection:	short circuit,over heat,over load,direct current